Discrete Logarithms in Generalized Jacobians

D\'ech\`ene has proposed generalized Jacobians as a source of groups for public-key cryptosystems based on the hardness of the Discrete Logarithm Problem (DLP). Her specific proposal gives rise to a group isomorphic to the semidirect product of an elliptic curve and a multiplicative group of a finite field. We explain why her proposal has no advantages over simply taking the direct product of groups. We then argue that generalized Jacobians offer poorer security and efficiency than standard Jacobians

Acute Ingestion of a Commercially Available Pre-workout Supplement Improves Anaerobic Power Output and Reduces Muscular Fatigue

The effect of a pre-workout supplement on anaerobic power output and muscular fatigue was examined. 18 participants took part in this double-blinded crossover study, reporting for testing on 3 occasions. Participants completed a 6x6 second repeated sprint test, with 20s recovery between sprints. Anaerobic power output was recorded as the highest power achieved during sprint test. Muscular fatigue was reported as a fatigue index across the six sprints ((maximum power – minimum power) ÷ total sprint time). During a baseline visit, participants consumed 250ml of water 30 minutes prior to testing, whilst in subsequent visits a taste-matched placebo (250ml water mixed with sugar-free juice) or a pre-workout supplement (250ml water mixed with one serving of ‘THE PRE’ myprotein.com). Anaerobic power output increased following pre-workout ingestion (pre-workout supplement, 885.8 ± 216.9W; Placebo, 853.6 ± 206.5W; Baseline, 839.3 ± 192.6W). Baseline vs pre-workout supplement (p = 0.01, g = 0.30); Placebo vs pre-workout supplement (p = 0.01, g = 0.20); Baseline vs Placebo (p = 0.59 g = 0.09). Muscular fatigue was reduced following pre-workout ingestion (Baseline, 4.92 ± 1.83W.s; Placebo, 4.39 ± 1.93W.s; pre-workout supplement, 3.31 ± 1.34W.s). Baseline vs pre-workout supplement (p = < 0.01 g = 0.98); Placebo vs pre-workout supplement (p = 0.01, g = 0.63); Baseline vs Placebo (p = 0.20, g = 0.28). Acute ingestion of a pre-workout supplement significantly improves anaerobic power output and attenuates muscular fatigue during repeated sprint cycling

A noncontact ultrasonic platform for structural inspection

Miniature robotic vehicles are receiving increasing attention for use in nondestructive testing (NDE) due to their attractiveness in terms of cost, safety, and their accessibility to areas where manual inspection is not practical. Conventional ultrasonic inspection requires the provision of a suitable coupling liquid between the probe and the structure under test. This necessitates either an on board reservoir or umbilical providing a constant flow of coupling fluid, neither of which are practical for a fleet of miniature robotic inspection vehicles. Air-coupled ultrasound offers the possibility of couplant-free ultrasonic inspection. This paper describes the sensing methodology, hardware platform and algorithms used to integrate an air-coupled ultrasonic inspection payload into a miniature robotic vehicle platform. The work takes account of the robot's inherent positional uncertainty when constructing an image of the test specimen from aggregated sensor measurements. This paper concludes with the results of an automatic inspection of a aluminium sample

Efficient algorithms for pairing-based cryptosystems

We describe fast new algorithms to implement recent cryptosystems based on the Tate pairing. In particular, our techniques improve pairing evaluation speed by a factor of about 55 compared to previously known methods in characteristic 3, and attain performance comparable to that of RSA in larger characteristics.We also propose faster algorithms for scalar multiplication in characteristic 3 and square root extraction over Fpm, the latter technique being also useful in contexts other than that of pairing-based cryptography

Miniature mobile sensor platforms for condition monitoring of structures

In this paper, a wireless, multisensor inspection system for nondestructive evaluation (NDE) of materials is described. The sensor configuration enables two inspection modes-magnetic (flux leakage and eddy current) and noncontact ultrasound. Each is designed to function in a complementary manner, maximizing the potential for detection of both surface and internal defects. Particular emphasis is placed on the generic architecture of a novel, intelligent sensor platform, and its positioning on the structure under test. The sensor units are capable of wireless communication with a remote host computer, which controls manipulation and data interpretation. Results are presented in the form of automatic scans with different NDE sensors in a series of experiments on thin plate structures. To highlight the advantage of utilizing multiple inspection modalities, data fusion approaches are employed to combine data collected by complementary sensor systems. Fusion of data is shown to demonstrate the potential for improved inspection reliability

Simulation of ultrasonic lamb wave generation, propagation and detection for an air coupled robotic scanner

A computer simulator, to facilitate the design and assessment of a reconfigurable, air-coupled ultrasonic scanner is described and evaluated. The specific scanning system comprises a team of remote sensing agents, in the form of miniature robotic platforms that can reposition non-contact Lamb wave transducers over a plate type of structure, for the purpose of non-destructive evaluation (NDE). The overall objective is to implement reconfigurable array scanning, where transmission and reception are facilitated by different sensing agents which can be organised in a variety of pulse-echo and pitch-catch configurations, with guided waves used to generate data in the form of 2-D and 3-D images. The ability to reconfigure the scanner adaptively requires an understanding of the ultrasonic wave generation, its propagation and interaction with potential defects and boundaries. Transducer behaviour has been simulated using a linear systems approximation, with wave propagation in the structure modelled using the local interaction simulation approach (LISA). Integration of the linear systems and LISA approaches are validated for use in Lamb wave scanning by comparison with both analytic techniques and more computationally intensive commercial finite element/difference codes. Starting with fundamental dispersion data, the paper goes on to describe the simulation of wave propagation and the subsequent interaction with artificial defects and plate boundaries, before presenting a theoretical image obtained from a team of sensing agents based on the current generation of sensors and instrumentation

Generation of internal solitary waves by frontally forced intrusions in geophysical flows

International audienceInternal solitary waves are hump-shaped, large-amplitude waves that are physically analogous to surface waves except that they propagate within the fluid, along density steps that typically characterize the layered vertical structure of lakes, oceans and the atmosphere. As do surface waves, internal solitary waves may overturn and break, and the process is thought to provide a globally significant source of turbulent mixing and energy dissipation. Although commonly observed in geophysical fluids, the origins of internal solitary waves remain unclear. Here we report a rarely observed natural case of the birth of internal solitary waves from a frontally forced interfacial gravity current intruding into a two-layer and vertically sheared background environment. The results of the analysis carried out suggest that fronts may represent additional and unexpected sources of internal solitary waves in regions of lakes, oceans and atmospheres that are dynamically similar to the situation examined here in the Saguenay Fjord, Canada

The Effects of Olympic Weightlifting Derivatives on Muay Thai Roundhouse Kicking Performance

The purpose of this study was to identify performance measures in roundhouse striking, by the implementation of Olympic Weightlifting Derivatives (OWLD) with Muay Thai fighters. Forty male subjects were recruited, with twenty male subjects placed in the experimental group (EG)and twenty male subjects in the control group (CG) and were randomly assigned to their groups. Mean 26 years 3 (± 3.2), weight and height 82.4 kg (± 12.2), and 180.7cm (± 3). Pre- and post-intervention and control group testing included roundhouse strike impact power, measured using the PowerKubeTM, a dynamometer that identifies the impact power used to produce striking potential. Countermovement jumps were recorded using a single PASCO force platform one axis PS2141. The EG subjects were prescribed an eight-week training programme that was carried out prior to their sparring with twenty minutes rest to recover. The control group were instructed to carry out traditional training that involved the same volume of sparring, cardiovascular fitness, and circuit training as the EG. Within-group post test results showed the EG and CG group demonstrated significantly different results in RHK performance (p ≤ 0.01); however, no significant differences were observed between groups. Results in the countermovement jump were, however, highly significant (p ≤ 0.01) in the EG (within group), but not significant in the CG (p ≥ 0.05); again, no significant differences were observed between groups. Meaningful differences were seen in the EG with a 7.41% increase in roundhouse kicking performance and 7.54% in countermovement jump height, compared to the CG that elicited negligible differences of only 1.56% in the roundhouse kicking performance and 0.33% in countermovement jumper, demonstrating OWLD would improve the performance of the Muay Thai fighter

On the morphological deviation in additive manufacturing of porous Ti6Al4V scaffold: a design consideration

Additively manufactured Ti scaffolds have been used for bone replacement and orthopaedic applications. In these applications, both morphological and mechanical properties are important for their in vivo performance. Additively manufactured Ti6Al4V triply periodic minimal surface (TPMS) scaffolds with diamond and gyroid structures are known to have high stiffness and high osseointegration properties, respectively. However, morphological deviations between the as-designed and as-built types of these scaffolds have not been studied before. In this study, the morphological and mechanical properties of diamond and gyroid scaffolds at macro and microscales were examined. The results demonstrated that the mean printed strut thickness was greater than the designed target value. For diamond scaffolds, the deviation increased from 7.5 μm (2.5% excess) for vertical struts to 105.4 μm (35.1% excess) for horizontal struts. For the gyroid design, the corresponding deviations were larger, ranging from 12.6 μm (4.2% excess) to 198.6 μm (66.2% excess). The mean printed pore size was less than the designed target value. For diamonds, the deviation of the mean pore size from the designed value increased from 33.1 μm (-3.0% excess) for vertical struts to 92.8 μm (-8.4% excess) for horizontal struts. The corresponding deviation for gyroids was larger, ranging from 23.8 μm (-3.0% excess) to 168.7 μm (-21.1% excess). Compressive Young's modulus of the bulk sample, gyroid and diamond scaffolds was calculated to be 35.8 GPa, 6.81 GPa and 7.59 GPa, respectively, via the global compression method. The corresponding yield strength of the samples was measured to be 1012, 108 and 134 MPa. Average microhardness and Young's modulus from α and β phases of Ti6Al4V from scaffold struts were calculated to be 4.1 GPa and 131 GPa, respectively. The extracted morphology and mechanical properties in this study could help understand the deviation between the as-design and as-built matrices, which could help develop a design compensation strategy before the fabrication of the scaffolds